手动油压弯管机
Designation
Pipe
radius
Code
φinches
φmm
mm
180 °bending devise without tools
2401 90
Pair of sliding cheeks
2402 17
Tools include one
former and two rollers
3/8"
12/17
46.5
2401 91
1/2"
15/21
55.5
2401 92
3/4"
20/27
71
2401 93
1"
26/34
94
2401 94
11/4"
33/42
150
2401 95
11/2"
40/49
163
2401 96
2"
50/60
220
2401 97
   






Bending capacities: -copper tubes from 8 to 22 mm (3/8"to 7/8")
Deliverable in 2 different versions:
1.universal form suitable for all qualities of tubes
2.standard form which permits a shorter bending radius for use only with high-quality tubes
-"gaz"pipes :1/4"-3/8"-1/2"
Expanding capacities: -soft copper tubes from 10 to 42 mm and 3/8" to 1/4"(OD)
-hard copper tubes from 10 to 22 mm and 3/8" to 7/8"(OD)
-possible of multi-diameter tube (eg:12→14,16→22).
Flaring capacities: -flat flares on hard copper from 10 to 22mm and 3/8" to 1/4"(OD)
-conical flares on hard copper from 10 to 22mm and 3/8" to 7/8"(OD)
Engine power: -single-phase induction 230V,50Hz motor,250W with brake
-single-phase induction 115V,60Hz motor,300W
-single-phase induction 115V,50Hz motor,250W
Nominal rotation: -3000 R.P.M.at 50Hz
speed: -3600 R.P.M.at 60Hz
Machine net weight: 26Kg
Machine dimensions: 430×380×300 mm
     
bends multi-diameter tubes to 180°Bending grooves confrom with standard and Universal code radil. Expands hard copper tubes from 10 to 22 mm(3/8″ to 7/8″) vise grips tubes up to 32 mm.Use for cutting T-flaring,etc.

返回